What Are Glycol Chiller Systems?

Glycol chiller systems are widely used across UK industries where precise temperature control is required. From food and beverage production to pharmaceutical manufacturing and industrial processing, these systems provide stable and controlled cooling using a solution of glycol blended with water to transfer heat.

Unlike standard water chillers, glycol chillers use a mixture of propylene or ethylene glycol combined with water. This makes them suitable for applications operating below 0°C or installations with outdoor pipework exposed to cold weather.

At a fundamental level, glycol chiller systems remove heat from a process and transfer it away through a refrigeration circuit. The cooled glycol solution is then circulated to the load, where it collects process heat and returns to repeat the cycle.

How a Glycol Chiller System Works

Effective system design ensures consistent output and reduced energy consumption. Core components typically include:

• Refrigeration compressor


• Heat rejection condenser


• Evaporator


• Expansion valve


• Integrated buffer tank and circulation pump


• Electrical control system

Within the evaporator, the refrigeration cycle removes heat from the circulating glycol solution. The chilled solution is then sent to the process load, absorbs heat, and flows back to the unit.

A typical glycol chiller system diagram shows the separation between the primary refrigeration loop and the secondary glycol circuit. The refrigeration loop manages heat removal, while the glycol loop transfers chilled fluid to the point of use. Accurate schematics are valuable for commissioning and diagnostics.

Glycol Chiller System Control Panel

The glycol chiller system control panel acts as the operational centre of the system. Modern panels typically include:

• Digital temperature controllers


• PLC or microprocessor interfaces


• Pressure protection cut-outs


• Circulation pump management


• Alarm notifications


• BMS or remote access integration

The control panel manages compressor cycling, supervises operating conditions and ensures safety limits are maintained. Many systems also log performance data to support service planning and operational records.

In facilities requiring precise cooling, reliable control prevents temperature drift that could affect product quality or equipment integrity.

Installing a Glycol Chiller System Control Panel

Proper glycol chiller system control panel installation is essential for safe operation and long-term reliability. Key factors include:

• Electrical compliance – The panel should be installed in accordance with UK standards, with correct breaker sizing and safe isolation points.


• Environmental positioning – Installation should avoid damp conditions and excessive ambient temperatures.


• Commissioning procedures – Post-installation checks must include sensor accuracy, alarm testing and pump sequencing confirmation.

Commissioning ensures the unit operates in line with the original glycol chiller system design specifications.

Design Considerations for Glycol Chiller Systems

Effective glycol chiller system design begins with detailed analysis of process requirements. Engineers evaluate:

• Target operating temperatures


• Flow rate and pipe sizing


• Ambient environmental conditions


• System resilience planning


• Allowance for capacity growth

Oversized systems increase energy consumption, while undersized units struggle to maintain setpoints. Load calculations must consider peak demand and operational cycles.

Fluid selection also plays a role. Food-related industries often favour propylene glycol for safety reasons, whereas ethylene glycol can be chosen for applications prioritising thermal performance.

Additional considerations such as pipe insulation, pump specification and heat exchanger configuration influence stability, efficiency and lifespan.

Applications of Glycol Chiller Systems

Glycol chiller systems support numerous sectors across the UK, including:

• Breweries and distilleries


• Dairy and food processing facilities


• Pharmaceutical production environments


• Laser and medical equipment cooling


• Plastics processing and injection moulding


• Cold storage and preparation areas

For example, in beverage production, chillers maintain fermentation temperatures and cool storage tanks. In manufacturing settings, they prevent overheating during continuous machinery operation.

Protecting System Performance

Routine maintenance supports consistent output and equipment longevity. Typical servicing tasks include:

• Testing fluid concentration and condition


• Inspecting pumps and seals


• Cleaning condenser coils


• Reviewing operational parameters


• Confirming correct refrigeration performance

Over time, glycol can degrade or become contaminated, reducing heat transfer efficiency. Regular testing helps maintain optimal performance.

When correctly designed, installed and maintained, glycol chiller systems can provide reliable service for many years.

Frequently Asked Questions

What is the typical glycol percentage?

The required percentage depends on freeze protection and operating temperature, commonly ranging from 20–40%.

Can a glycol chiller be installed outdoors?

Yes, provided the unit is rated for outdoor use and protected against environmental exposure.

What makes glycol systems different?

Glycol systems use a glycol-water mixture to allow lower operating temperatures and prevent freezing.

Is remote access available?

Advanced control panels often provide remote monitoring and data logging functionality.

What is the recommended testing frequency?

Fluid condition should be reviewed regularly based on system workload.

Where are they most commonly used?

Food production, beverage processing, pharmaceuticals and precision engineering rely heavily on glycol cooling.

Final Considerations

Glycol chiller systems deliver dependable cooling performance across a broad range of industrial and commercial applications. From careful glycol chiller system design to compliant control panel installation and structured maintenance, every stage affects efficiency and longevity.

Whether planning a new installation or upgrading existing equipment, engaging knowledgeable engineers helps align system capacity with process needs. For technical advice and tailored solutions, visit the relevant specialists at the Newsome glycol chillers page to review professionally engineered systems.